Navigate to the Device Manager window by performing a search in WIndows for Device Manager and opening it.Ĥ. Unzip the file and install the corresponding exe file.ģ. – File Name: Cisco_usbconsole_driver_3_1.zip – Description: Cisco_usbconsole_driver_3_1.zip Obtain the file Cisco_usbconsole_driver_3_1.zip from the website Use this procedure to install the USB driver on Windows XP, Windows 2000, Windows Vista, Windows 7, Windows 8, and Windows 10.ġ. Installing the Cisco Microsoft Windows XP, 2000, Vista, 7, 8, and 10 USB Device DriverĪ USB device driver must be installed the first time a Microsoft Windows-based PC is connected to the USB console port on the switch. Follow the steps in Completing the Setup Program. Press Enter to display the setup prompt.ĩ. Connect power to the switch as described in Connecting to Power.Ĩ. Configure the baud rate and character format of the PC or terminal to match the console port characteristics:ħ. The program, frequently a PC application such as HyperTerminal or ProcommPlus, makes communication possible between the switch and your PC or terminal.Ħ. Start the terminal-emulation program on the PC or the terminal. The assigned COM port appears in parenthesis at the end of the line with this entry: Cisco USB System Management Console.Ĥ. Click the Hardware tab and choose Device Manager. Choose Start > Control Panel > Systems.ī. Identify the COM port assigned to the USB-mini console port:Ī. See Connecting the USB-Mini Console Cable.ģ. Connect an USB cable to the PC USB port, and connect the other end of the cable to the switch mini-B (5-pin-connector) USB-mini console port. See Installing the Cisco Microsoft Windows XP, 2000, Vista, 7, 8, and 10 USB Device Driver for more information.įigure 61 Connecting the USB-Mini Console CableĢ. If you are connecting the switch USB-mini console port to a Windows-based PC for the first time, install a USB driver. Press Enter to display the setup prompt.Ħ. The PC or terminal displays the bootloader sequence.ĥ. Connect power to the switch as described in Connecting to Power. Configure the baud rate and character format of the PC or terminal to match the console port characteristics:Ĥ. The program, frequently a PC application such as HyperTerminal or ProcommPlus, makes communication between the switch and your PC or terminal possible.Ĭonsole cable (RJ-45-to-DB-9 adapter cable)ģ. Connect the other end of the cable to the switch console port.Ģ. Connect the RJ-45-to-DB-9 adapter cable to the 9-pin serial port on the PC. See Figure 59.įigure 59 Removing the USB Mini-Type B Console Port Coverġ. Use a Phillips screwdriver to loosen the captive screw on the USB mini-type B console port cover. To remove the cover from the USB mini-type B console port:ġ. ■ USB Mini-Type B Console Port Removing the USB Mini-Type B Console Port Cover Use one of these options to access the CLI: You can enter Cisco IOS commands and parameters through the CLI. Accessing the CL I Through the Console Port For information about setting up the switch by using Express Setup, see Running Express Setup.īefore connecting the switch to a power source, review the safety warnings in Warnings.įor installation procedures, see Switch Installation. This appendix provides a command-line interface (CLI)-based setup procedure for a switch. Configuring the Switch with the CLI-Based Setup Program
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |